Turning waste plastic into carbon nanotubes
December 12th, 2009 - 2:40 pm ICT by ANI ( 1 comment )London, Dec 12 (ANI): A chemist has created an ‘upcycling’ method of turning the disposable plastic carrier bags into carbon nanotubes.
Vilas Ganpat Pol at the Argonne National Laboratory in Illinois developed the carrier-bag-to-nanotube technique and converts high or low-density polyethylene (HDPE and LDPE) into valuable multiwalled carbon nanotubes.
The chemist has even used the nanotubes to make lithium-ion batteries.
Pol made the nanotubes by cooking 1-gram pieces of HDPE or LDPE at 700 degree C for 2 hours in the presence of a cobalt acetate catalyst and then letting the mixture cool gradually.
Above 600 degree C the chemical bonds within the plastic completely break down and multiwalled carbon nanotubes grow on the surface of the catalytic particles.
A lot of catalyst is needed to get good results - about a fifth of the weight of the plastic being converted - and it cannot easily be recovered afterwards.
However, Pol said that this is still one of the cheapest and environmentally friendly ways yet found to grow nanotubes.
“Other methods generally require a vacuum to avoid oxygen interaction with the catalyst as well as with the system. In my new reaction there is no vacuum - the formation of oxide is inhibited due to the presence of a continuous reducing hydrocarbon atmosphere at 700 degree C,” New Scientist quoted him as saying.
Individual pieces of the catalyst become trapped inside forests of newly grown nanotubes. However, Pol has shown the nanotubes can be used as is without further processing to cut them free.
“I have used the as-prepared cobalt-encapsulated nanotubes as an anode material for lithium-ion batteries and they work fantastically. The specific capacity of my carbon nanotubes is higher than commercial nanotubes,” he said.
He thinks that might be down to slight imperfections in the usually-regular structure of the nanotubes, created by the reducing atmosphere during fabrication.
Pol said that the cobalt impurities also make the nanotubes suitable for use in lithium-air batteries, because the cobalt is converted to cobalt oxides that perform as catalysts to help the reactions of ions in the battery that let current flow.
He has patented the use of the cobalt-containing nanotubes in both lithium-ion and lithium-air batteries.
“The cobalt is not an impurity, it is an asset,” he said.
The study has been published in the Journal of Environmental Monitoring. (ANI)
- Carbon nanotubes in lithium batteries improve energy capacity - Jun 21, 2010
- Cellphone batteries to recharge in 15 minutes - Nov 18, 2011
- Scientists create the world's tiniest battery - Dec 10, 2010
- Soon, cheap and durable touch screen for your phone - Jun 24, 2010
- A splash of graphene can improve battery materials - Sep 23, 2009
- New method may help solve lithium battery safety problems - May 17, 2010
- Soon, batteries that could recharge within 10 minutes - Jul 18, 2010
- Why batteries lose their ability to hold a charge as they age - Oct 20, 2010
- New software makes future electric cars closer to reality - Mar 15, 2011
- Now, a futuristic fuel efficient lightweight car - Sep 13, 2011
- Silicon-coated nanonets could pave way for longer-lasting lithium-ion batteries - Feb 17, 2010
- Silicon 'can radically increase capacity of lithium-ion batteries' - Oct 14, 2010
- Volvo's futuristic car to use body as battery - Sep 30, 2010
- Electric cars can't save climate: Experts - Jun 18, 2010
- Nano-scale "fuses" generate 100 times more energy than conventional batteries - Mar 10, 2010
Tags: anode material, argonne national laboratory, carbon nanotubes, carrier bag, catalyst, chemical bonds, chemist, cobalt acetate, degree c, hdpe, hydrocarbon, imperfections, ldpe, lithium, lithium ion batteries, low density polyethylene, new scientist, particles, plastic carrier bags, vilas
February 9th, 2010 at 11:41 pm
Very good work.
This will help the mankind.
Proud that You are Indian.
Best wishes.
Ashok Dalvi