Washington, October 6 (ANI): In a new study, researchers at Ohio State University have discovered that adding silver nanoparticles to polymer solar cells boosts the materials’ electrical current generation.

The study was carried out by Paul Berger, professor of electrical and computer engineering and professor of physics at Ohio State.

Berger and his team measured the amount of light absorbed and the current density - the amount of electrical current generated per square centimeter - generated by an experimental solar cell polymer with and without silver nano-particles.

Without silver, the material generated 6.2 milli-amps per square centimeter. With silver, it generated 7.0 - an increase of almost 12 percent.

The small silver particles help the polymer capture a wider range of wavelengths of sunlight than would normally be possible, which in turn increases the current output, Berger explained.

He added that with further work, this technology could go a long way toward making polymer solar cells commercially viable.

“The light absorption of polymer solar cells is inadequate today,” he said.

“The top-performing materials have an overall efficiency of about 5 percent. Even with the relatively low production cost of polymers compared to other solar cell materials, you’d still have to boost that efficiency to at least 10 percent to turn a profit. One way to do that would be to expand the range of wavelengths that they absorb. Current polymers only absorb a small portion of the incident sunlight,” he added.

The new fabrication technique involves encasing each silver particle in an ultra-thin polymer layer - a different polymer than the light-absorbing polymer that makes up the solar cell - before depositing them below the light-absorbing polymer.

The coating prevents the silver particles from clumping, but also allows them to self-assemble into a dense and regular mosaic pattern that Berger believes is key to enhancing the light absorption.

“By changing the organic coating, we could change the spacing of the particles and alter the size of each particle. By fine-tuning the mosaic pattern, we could move the enhanced absorption to different wavelengths, and thus get even more of an improvement. I think we can get several percent more,” said Berger.

The semiconductor polymer captures more light because the metal nanoparticles absorb light that would normally be wasted.

This extra light energy excites electrons in the metal particles, creating electron waves called plasmons - a cross between plasma and photons.

The plasmons dance across the surface, depositing energy inside the solar cell that would otherwise be lost. (ANI)